D10-2D SYS 2 featuring Dante

D10-2 SYS 2

The D Series represents the global benchmark for digital audio induction loop systems. The compact, elegant and sturdy units not only feature digital signal processing and networking functionality, but are also the most versatile and powerful solution available. The D Series range consists of 4 class ‘D’ drivers (3 dual loop output and 1 single output models); meaning a 60%+ increase in energy efficiency over existing solutions. Drivers feature capacitive touch front panels with intuitive menus, built in test signals, and are fully networkable with a Wi-Fi accessible standard browser based control panel for remote set-up, monitoring and email alerts, and with Loopworks Measure LoopLink for easy test and commissioning.

The D10 features 10 Amps per loop output respectively plus ample voltage headroom, making it the most flexible solution on the market, suitable for a huge range of applications.


Williams AV is proud to offer Ampetronic Loop products in the United States and Canada. To purchase Ampetronic loop products in other countries, please visit https://www.ampetronic.com/

Description

The D Series represents the global benchmark for digital audio induction loop systems. The compact, elegant and sturdy units not only feature digital signal processing and networking functionality, but are also the most versatile and powerful solution available. The D Series range consists of 4 class ‘D’ drivers (3 dual loop output and 1 single output models); meaning a 60%+ increase in energy efficiency over existing solutions. Drivers feature capacitive touch front panels with intuitive menus, built in test signals, and are fully networkable with a Wi-Fi accessible standard browser based control panel for remote set-up, monitoring and email alerts, and with Loopworks Measure LoopLink for easy test and commissioning.

The D10 features 10 Amps per loop output respectively plus ample voltage headroom, making it the most flexible solution on the market, suitable for a huge range of applications.


Williams AV is proud to offer Ampetronic Loop products in the United States and Canada. To purchase Ampetronic loop products in other countries, please visit https://www.ampetronic.com/

Features

(1) D10-2US Dante D-Series Multiloop driver 10A 120V US
(2) PLR BP1 body-pack receivers with batteries
(2) EAR 022 surround earphones
(1) BAT KT6 Dual Drop-in Charger Kit (includes CHG 3502 Dual Drop-In Charger and (2) BAT 026-2 AA NiMH batteries)
(2) Copper Foil Tape 20mm wide 0.15mm thick 200m reel UL approved 3.0mm²
(1) IDP 009 ADA Wall Plaque (T-Coil)

D10-2 SYS 2

Power input 50/80/160W 230V AC nominal, 45-65Hz [120V option]
Power switch on front panel
Input 1 and 2 Programmable Microphone / Line XLR balanced input with programmable switchable between microphone and line via panel menu Microphone specification; 200 – 600Ω, sensitivity -64dBu.
Selectable 12V phantom power on microphone only
Line sensitivity; -39dBu Input 2 can also be used for AES3 Digital Audio Signals
Slave In 6.35mm jack socket for linking more than one amplifier. Inserting plug disables other inputs
Loop Output Drive voltage 33.9Vrms (45Vpk) at maximum output current per channel
Loop Output Drive Current CD7-X: 7Arms (10Apk) up to 60 seconds continuous 1kHz sine wave, peak [gt]10A per channel; Cont. pink noise 3.3Arms short term peaks [gt]10A per ch.
D10-x: 10Arms (14.1Apk) up to 60 seconds continuous 1kHz sine wave, peak [gt]14.1A per channel; Cont. pink noise 4.7Arms short term peaks [gt]14.1A per ch.
D14-x: 14Arms (19.8Apk) up to 60 seconds continuous 1kHz sine wave, peak [gt]19.8A per channel; Cont. pink noise 6.6Arms short term peaks [gt]20A per ch.; Level controlled via front panel menu or network; Drive current indicated on two 4-LED displays in 6dB increments
Slave Out 6.35mm jack socket to connect to other slave amplifiers
Loop Connectors Neutrik NL2 Speakons (supplied) for each output
Loop Monitor Provides access to monitor actual loop current via a 3.5mm stereo headphone connector on front panel; Channel A on left, channel B on right
DC Output Resettable, fuse protected 12V 0.1A. Operation can be configured via menu.
Freq. response 80Hz to 6.5kHz
Distortion THD+N [lt]0.2%1kHz sine at 2.33Arms
Automatic gain Control The AGC is optimised for speech. Dynamic range [gt]36dB
Metal loss correction Corrects system frequency response due to metal structures in a building. Gain constant at 1kHz, adjustable gain slope from 0 to 4dB per octave in 0.25dB increments. Custom 2 slope MLC allows different slopes and transition frequency to be set via the menu.
This does not compensate for signal loss from metal structures which can be significant.
Phase Shift User selectable at 0° or 90° between outputs
Fault Monitoring Indicators on the front panel;
Clipping – delivering over the rated voltage (per channel);
Error – Check status in menu
Temperature and loop errors reported via the status menu
Cooling Variable speed fan cooled. Front inlet, rear exhaust.
Size Full width 1U 19″ rack mount.
Width 430mm Depth 290mm Height 44mm
Weight D7-2: 4.62kg
D10-1: 4.37kg
D10-2: 5.5kg
D14-2: 6.9kg
Environment IP20 rated; 20 to 90% relative humidity; 0 to 35ºC
Mounting Freestanding;
1U 19″ rack mount (brackets included)

Warranty

5 Years

No Videos Are Available

Request a Demo

  • This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.