HLS-2D Metal Loss Test Driver

Developed to work in conjunction with the Loopworks Measure R1 or Ampetronic FSM, the HLS-2D Metal Loss Test Driver is a loop driver with a preset output level to give consistent test results as part of a quick and simple site assessment system.The HLS-2D comes with a 12V power supply but can also be used with a suitable 2V battery. It uses efficient class D current drive technology to reduce power consumption and heat output.

It is the only truly portable loop test driver that is capable of generating test signals to the IEC60118-4 Standard.The 4mm banana output sockets (included) allow simple connection to test cables and a 3.5mm single input cable completes the kit.

Williams AV is proud to offer Ampetronic Loop products in the United States and Canada. To purchase Ampetronic loop products in other countries, please visit https://www.ampetronic.com/

Description

Developed to work in conjunction with the Loopworks Measure R1 or Ampetronic FSM, the HLS-2D Metal Loss Test Driver is a loop driver with a preset output level to give consistent test results as part of a quick and simple site assessment system.The HLS-2D comes with a 12V power supply but can also be used with a suitable 2V battery. It uses efficient class D current drive technology to reduce power consumption and heat output.

It is the only truly portable loop test driver that is capable of generating test signals to the IEC60118-4 Standard.The 4mm banana output sockets (included) allow simple connection to test cables and a 3.5mm single input cable completes the kit.

Williams AV is proud to offer Ampetronic Loop products in the United States and Canada. To purchase Ampetronic loop products in other countries, please visit https://www.ampetronic.com/

Power Supply Standard format: 12V DC
Power Supply Connector: 2.1mm DC Power socket, centre positive
Power Supply Nominal voltage: 12V DC
Power Supply Fuse: 1.5A PTC
Power Consumption:(12V DC supply) 2.88W (240mA) continuous pink noise
9.2W (765mA) continuous sine
<0.6W (<50mA) quiescent
14.4W (1200mA) max short term peak
Indication: LED in case
Input 1 & 2 Connector: 3.5mm stereo socket, both audio channels are combined into the input signal for the driver.
Loop Output Connector: 2 x 4mm banana sockets
Loop Output Preset Output: 2.5ARMS
Rated temperature limited
Loop Output current (pink): 2.5A RMS
Loop Output Rated time for delivery: 1min
Loop Output Rated THD: <1%
Loop Output Output Impedance: >9Ω
Loop Output Current Indication: LED indicates >1A RMS
Loop Impedance: 0.3Ω to 1Ω, 1.3Ω reactive at 1.6kHz
Loop Rated Load: 80uH, 0.5R
Freq. Response: 100Hz to 5kHz ±1.5dB relative to 1kHz at low level.
Compression: (AGC) Time constants optimised for speech
Dynamic range: >36dB
Indication: LED in case
Dimensions: Width: 77mm
Length:150mm
Height: 16mm
Weight: 272g
Environment: IP40: <90% relative humidity, -30 to 75 ˚C
Heat dissipation <3W maximum, normally less

Warranty

None

Request a Demo

  • This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.