Pocketalker 2.0 Personal Amplifier

PKT 2.0 EH

$259.00

Hear what you want to hear by amplifying the sounds and voices most important to you with a Pocketalker 2.0 (PKT E1).

Simply plug the included earphone or headphone into the headphone jack. Position the internal microphone near the preferred sound and adjust the volume and tone control until the sounds you want to hear are clear.

The Pocketalker personal amplifier is used to amplify specific sounds or voices. It helps you hear what you want to hear by reducing distracting background noise.

 

Includes

System Includes

1-Pocktalker 2.0 personal amplifier (includes internal microphone)

1-MIC 014-R plug-in (no cord) microphone

1 – HED 024 folding headphone

1 – EAR 042 isolation earphone

1-BAT 010-2 two AAA alkaline batteries

1-WCA 007 WC 3.5mm male to 2.5mm female cable with mounting clips (12ft)

1-RCS 003 lanyard

All accessories can be purchased separately

Features

The Pocketalker 2.0 Personal Amplifier (PKT 2.0 EH | UPC 707976051677) features:

  • Ergonomic, lightweight design
  • Extended high and low frequency range
  • Superior sound quality
  • Internal microphone
  • Built-in T-coil loop compatible
  • Rechargeable ready
  • CE (Note 1) Approval

PKT 2.0 EH

Dimensions:

4.9” L x 2.0” W x 1.0” H. (124mm x 51mm x 25mm) (Not including clip or microphone assembly)

Weight:

3.1 oz. (88 grams) (with batteries)

Color/material:

White ABS/Polycarbonate molded plastic case.

*Battery Type:

Two (AAA size), either 1.5 VDC Alkaline* or 1.2 VDC NiMH rechargeable*

(Williams Sound BAT 010-2 Alkaline or BAT 022-2 NiMH)

Battery Life:

Up to 105 hours (typical usage) with the BAT 010-2 (Alkaline).

Low Battery Indicator: Power “On” Green light on front panel flashes.

**NiMH battery Charging:

Charging: 16 hours with BAT 022-2. Red LED blinks when charging.

End of Charge: Red LED is on solid. At end of charge, maintenance charge is provided.

NOTE: Charging requires optional charging kit BAT KT7.

Microphone:

Internal, omnidirectional MEMS microphone (micro-electro-mechanical system).

Optional External, omnidirectional, plug-in electret microphone with foam windscreen and 3.5mm mono plug (MIC 014-R).

T-Coil:

Internal with on/off switch and LED indicator.

Tone Control:

External rotary control knob allows user to adjust high/low frequency to optimize hearing.

***Balance Control:

Adjusts Left/Right Volume Balance

Power/Volume Control:

External rotary volume control knob with integrated power ON-OFF switch.

Microphone Jack:

3.5 mm, stereo mini plug.

Tip=Mic signal, Ring=NC, Sleeve=Gnd.

Headphone Jack:

3.5 mm, stereo mini plug.

Tip=Left/Mono, Ring=Right, Sleeve=Gnd.

Optional Accessories:

Clip: CLP 014; Allows the user to clip MIC 014 to clothing such as a lapel or shirt pocket.

Lanyard: RCS 003; Allows user to wear unit around the neck, or as a wrist strap.

3.5mm-3.5mm Extension Cord: WCA 007 WC; extends an external microphone to 12 ft.

Stereo Earphones / Headphones / Neckloop:

EAR 042 / HED 024, HED 036 / NKL 001-S (stereo) Neckloop

Mono Earphones / Headphones / Neckloop***:

EAR 013, EAR 008, EAR 022, EAR 041 / HED 021, HED 027 / NKL 001 (mono) Neckloop

Charging Kits: BAT KT7

Approvals:

CE (Note 1), RoHS2 (Note 2), FCC, IC, WEEE (Note 3)

Warranty:

5 years, parts and labor (90 days on accessories)

Electrical Specifications (1 kHz Sine Wave reference) Typical

Power output:

52 mW (max) into 32 ohms (Stereo)

ALC:

Automatic Level Control; Limits maximum output level

Distortion:

1% THD (max)

Max gain:

63 dB @ 2.5 kHz (Tone=High)

Operational temperature:

41°F to 104°F (5°C to 40°C)

Frequency response

Tone Control at high position:

2.7dB boost at 5 kHz, 6.7dB cut at 400 Hz.

Tone Control at mid position:

0.6dB cut at 5 kHz, 2.9dB cut at 400 Hz.

Tone Control at low position:

2.0dB cut at 5 kHz, 3.0dB boost at 400 Hz.

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

*Battery switch must be in correct position for battery type being used.

**Charging requires optional charging kit BAT KT7.

***When using mono earphones, headphones or neckloop, the balance control on the Pocketalker must be turned fully counter-clockwise (to the “mono” position) for best volume and battery life.

The Pocketalker is not sold, advertised, or intended for use as a personal hearing aid. Williams Sound recommends that any individual experiencing hearing loss be examined by a physician/audiologist to determine the cause before using an amplification device such as the Pocketalker.

Acoustic Specifications for Headphones recommended for use with the Pocketalker are published on our website.

Note 1: CE approval does not apply if product does not display the CE mark.

Note 2: RoHS2: Directive 2011/65/EU

Note 3: WEEE: Directive 2012/19/EU

This product is covered by the European directives above, including amendments, concerning Waste Electrical and Electronic Equipment (WEEE). Recycle the product and its accessories according to national regulations.

 

EAR 042

Style Dual, in-ear, isolation earphones
Plug 3.5mm stereo
Cord 39"
Driver Size 10 mm
Nominal Impedance 32Ω
Freq. Response 20 - 20kHz
Weight 10g
Max Power Input 5 mW
Sensitivity 104 dB @ 1kHz
Replacement Silicone Tips EAR 043 (0ne pair)
 

HED 024

Style Stereo Headphones
Plug 3.5mm stereo
Cord 39"
Driver Size 30 mm
Nominal Impedance 16Ω
Freq. Response 20 - 20kHz
Weight 60g
Max Power Input 100 mW
Sensitivity 108 dB @ 1kHz
Replacement Pads HED 023 (one pair)
 

MIC 014-R

Phantom Powered No
Pick-Up Pattern Omni-directional
Element Electret Condenser
Mic Diameter 10 mm not including windscreen 19 mm with windscreen
Sensitivity -42 dB ± 3 dB
Frequency Range 20 Hz - 16 kHz
Output Impedance 2.2 kΩ
Standard Operation Range 2 - 10 V DC
Signal-to-Noise Ratio [gt]58 dB
Replacement Windscreen WND 002
Optional 12 ft Extension Cord WCA 007
Optional Microphone Clip CLP 014
Color Gold
Weight 5 g (0.2 oz)
Plug 3.5 mm mono
Cord None
Approvals RoHS
Warranty 90 days
 

Warranty

5 Years