8-Person Digi-Wave Wireless Intercom System

DWS COM 8 400

This portable wireless intercom system allows eight people to talk and listen to each other wirelessly without interference. Its use of a frequency-hopping algorithm ensures secure communication. Its portability makes it the ideal tour guide solution for venues requiring two-way communication.

5 Year Warranty Badge

Visit the Warranty and Registration page for details 

System Includes

(8) DLT 400 transceivers
(8) MIC 144 headset microphones
(8) DW ACC PAC4
(1) CCS 056 DW 11 system carry case
(1) CCS 061 GR grey silicone skin
(7) CCS 061 BK black silicone skins.

How It Works

CCS 056 DW 11

Interior Dimensions 13.0” W x 18.0” L x 6.7”H (33 cm W x 46 cm L x 17 cm H)
Exterior Dimensions 15.7” W x 19.7” L x 7.2” H (40 cm W x 50 cm L x 18 cm H)
Lid Inner Depth 1.5” (4 cm)
Bottom Inner Depth 5.2” (13 cm)
Approx. weight (empty) 6.6 lbs (3 kg)
Material Copolymer
Minimum Temperature -40ºF (-40ºC)
Maximum Temperature 160ºF (71.1ºC)
 

DLT 400

Dimensions 4.22"W x 2.60"H x 0.50"D (107.3 mm x 66 mm x 12.6 mm)
Weight 3.3 oz (94 g) including battery
Color Black/Silver (Front/Back)
Case Material Black ABS plastic
Battery type Lithium Polymer with smart charge built into transceiver; 1800 mAH
Battery life Up to 16 hrs talk time per charge@ 1ch Tx and 1ch Rx
Power Save Auto Sleep Mode after 5 minutes if no RF signal from compatible devices (Power can be turned off in Advanced Settings if desired)
Charge time 5 hrs. approx.
System Voltages OLED 14VDC; RF 5VDC; Logic 3.3 VDC
Operating frequencies 2.4 GHz (ISM band); 2402 – 2476 MHz FHSS
Audio Frequency response (-3dB Level)
Interpretation, Tour, Hearing Asst (≤4 mics): 100 – 11,500 Hz
Other Modes: 100 – 7,200 Hz
SNR 73 dB (A-weighted, default Rx volume with mic input )
THD 0.1 % (Default Volume, 1kHz)
Microphone input Internal microphone (disabled when MIC jack engaged) and 3.5 mm phone jack (sleeve) with electret microphone bias, adjustable gain with 63dB range.
Line Input USB-C, Adjustable level
Headphone Output 3.5 mm TRRS headphone jack; 25 mW, R 32 ohms
Audio Output Headphone: Max SSPL 90 111.8dB (EAR 013), 116.8dB (EAR 041) Line: USB-C, Adjustable level
Range Up to 900 ft (274 m) (depending upon environmental conditions)
Modulation FSK
RF Output 19 dBm Max
Security 87-bit encryption (300 Series Compatible), 87+128 bit Encryption, Encryption PIN, Lock for settings
Side tone -6 dB below volume, tone variation (Off, Low and High settings available)
Indicators OLED
LEDs Red LED around Talk button when enabled; Bi-color, changing green and red LED at top
Charging Connectors USB-C; Two contacts for use with CHG 412
Compatible Receiver DLR 400 RCH, DLR 400 ALK, DLT 300 with some limitations and DLR 360 with some limitations
Operating Temperature Range 14º to 113ºF (-10º to 45ºC)
Approvals FCC, Industry Canada, CE, RoHS 3, WEEE, RCM, ANATEL, KC, Giteki
Warranty 5 years on parts and labor with product registration; 2 years standard without registration. Internal batteries are covered for 1 year and accessories for 90 days, regardless of registration. Visit the Warranty and Registration page for details. 
 

Warranty

5 years with registration - 2 years standard (90 days for accessories)

No Firmware Found

  1. What is the Digi-Wave® AIM System? The Digi-Wave AIM (Advanced Interpretation Module) System is a portable digital interpretation system. It includes all the features of the original Digi-Wave, plus Q&A mode, custom channel naming, up to 24 channels, subgroup division, and offline programming through Control Mode.
  2. What is included with the AIM System? The system includes:
    • (3) DLT 400-AIM transceivers
    • (9) DLR 400 RCH receivers
    • (2) MIC 144 headset microphones
    • (1) MIC 414 plug-in microphone
    • (9) EAR 022 surround earphones
    • (1) CHG 412 PRO case with 12-bay charger
    • (1) CCS 061 GR grey silicone skin
    • (9) CCS 061 BK black silicone skins
    • (1) CCS 061 BL blue silicone skin
    • (1) CCS 061 RD red silicone skin
  3. How is the system set up out of the box? The system is configured for two languages: one presenter, one bilingual interpreter, one transceiver with a plug-in mic for audience questions, and nine receivers for listeners.
  4. Can I add more listeners or talkers? Yes. Add DLR 400 RCH receivers for more audience members. Add DLT 400-AIM transceivers for bilingual meetings or two-way tours.
  5. What is Q&A mode? Q&A mode supports bilingual question-and-answer sessions between the audience and the presenter. It can also be used for bilingual meetings and two-way tours, using two open mics, one for each language.
  6. How many channels does the AIM System support? Up to 24 channels for interpretation.
  7. Do receivers need specific firmware? Yes. The DLT 400-AIM requires DLR 400 RCH receivers running firmware 1.3.0 or greater. The latest receiver firmware is available on the DLR 400 RCH product page. Contact Tech Services with any questions.
  8. Can I name the channels? Yes. Choose from 100 ISO language abbreviations, or create custom names up to 5 characters, such as room names.
  9. What is subgroup division? Subgroup division lets you split devices into subgroups that each show only a subset of channels. This is useful for divisible rooms or when group needs change during an event.
  10. What is Control Mode? Control Mode lets you program channel names and subgroups offline, without interrupting an event in progress.
  11. Where is the AIM System typically used? It is used for interpreted presentations, guided tours, bilingual business meetings, and two-way tours.
  12. What is the range? Up to 900 ft. (274 m), depending on environmental conditions.
  13. What frequency does it use? The system operates in the 2.4 GHz ISM band (2402–2476 MHz) using frequency-hopping spread spectrum (FHSS). No license is required.
  14. Is the system secure? Yes. The transceivers and receivers support 87-bit encryption (compatible with the 300 Series) and 87+128-bit encryption, plus an encryption PIN and a settings lock.
  15. How long do the batteries last? Each unit has an internal 1800 mAh lithium polymer battery. The DLT 400-AIM provides up to 16 hours of talk time per charge (1 channel transmit and 1 channel receive). The DLR 400 RCH provides up to 32 hours per charge (1 channel receive). Both units sleep automatically after 5 minutes without an RF signal.
  16. How are the units charged? The included CHG 412 PRO charges up to 12 transceivers and receivers at once in about 5 hours, and comes in a carrying case. Units can also be charged individually through their USB-C ports.
  17. What microphone options does the DLT 400-AIM have? The DLT 400-AIM has a built-in microphone and a 3.5 mm mic jack with electret bias and adjustable gain. The internal mic is disabled when an external mic is plugged in. The system includes two MIC 144 noise-cancelling headset mics and one MIC 414 plug-in mic.
  18. Can the system connect to a sound system? Yes. Both the DLT 400-AIM and DLR 400 RCH have an adjustable line-level audio connection on the USB-C port. The DLT 400-AIM accepts line input there, and both units provide line output.
  19. What certifications does it have? The DLT 400-AIM and DLR 400 RCH are FCC, Industry Canada, CE, RoHS 3, WEEE, RCM, ANATEL, KC, and Giteki approved. The CHG 412 PRO is CE, FCC, WEEE, RoHS, and CB approved.
  20. What is the warranty? The AIM System is covered for 5 years on parts and labor with product registration, or 2 years standard without registration. Internal batteries are covered for 1 year. Accessories are covered for 90 days, regardless of registration.

Design & Consultant Specs