Architectural/Consultant Specs The Infrared Transmitter shall consist of an all-in-one modulator and emitter operating on 2.3 MHz and/or 2.8 MHz (or 3.3 and/or 3.8 MHz). The carrier frequency shall use 50 kHz deviation and 50 µS pre-emphasis. The transmitter will operate in 2-channel mode on 2.3 and 2.8 or on 3.3 and 3.8 MHz. The transmitter will operate in single-channel mode on 2.3, 2.8, 3.3, or 3.8 MHz. The transmitter shall have coverage up to 32,000 ft² (2,972 m²) with the WIR RX22-4 infrared receiver in single-channel mode or 19,000 ft². (1,765 m²) with the RX20 infrared receiver in single-channel mode. The transmitter shall be housed in a heavy-duty black plastic enclosure with a metal plate base and a durable infrared transparent front lens. It shall be convection-cooled without fans and have a sleep/power save mode that shuts off the IR when no audio is present for 12 minutes.The Transmitter shall have a signal-to-noise ratio of 70 dB or better and have an audio frequency response of 95 Hz to 17.6Hz, -3 dB re 1 kHz (line inputs), and 125 Hz to 17.0 kHz, -3 dB re 1 kHz (microphone input). The Transmitter includes an omnidirectional mounting bracket for various permanent installations. Each channel shall have a line-level Phoenix-style connector input, and each channel shall have an audio input-level LED.There shall be a single 3.5 mm microphone input with gain control, and the mic input shall have a channel selector switch. The transmitter shall have a switch to turn off all indicator LEDs if pressed and held and change the carrier frequency set if pressed and held. The transmitter shall be powered by a 48 VDC universal power supply, 50-60 Hz, 100-240 VAC input, 18 W with optional Power over Ethernet (PoE) support. The transmitter shall have RS-232 monitoring and control available for third-party controllers.The transmitter shall be covered by a two-year parts and labor warranty and 90 days on accessories. The Williams AV SoundPlus T3^® infrared transmitter is specified.

Dimensions:	9.0" W (229 mm) x 3.8" D (97 mm) x 1.4" H (36 mm)
Weight:	0.84 lb. (0.38 kg)
Color:	Black
Power Supply:	TFP 057 Desktop style international certified power supply with IEC line cord, 100-240 VAC input, 50-60 Hz, 18 W; 48 VDC output
DC Power Input:	2.1 mm ID barrel connector, 48 VDC, 0.2A, center positive
Power Indicator:	Green LED
Sleep/Power Save Mode:	Shuts off IR when no audio present for 12 minutes
Modulation:	FM Wideband, ±50 kHz deviation max, 50 μS pre-emphasis
Baseband Frequencies:	2.3, 2.8, 3.3, 3.8 MHz
Coverage Area:	Up to 32,000 sq. ft (2,972 sq. m) in single-channel mode with the RX22-4 receiver Up to 19,000 sq. ft (1,774 sq. m) with the RX20 stethoset receiver
Microphone gain adjust:	Rotary 10 dB range
Microphone channel switch:	Selects microphone input to Ch. A or Ch. B
Microphone input:	3.5 mm, stereo jack with signal and bias connected to tip, electret microphone compatible (6 VDC bias supply with 2.7 k ohm series resistor)
Audio Inputs:	Line inputs: Phoenix style connector jack for Ch A and Ch B accept line level, balanced or unbalanced audio
Audio Indicators:	One yellow LED per channel. Lights up and stay on steady with minimum audio level.
Signal-to-Noise Ratio:	70 dB (line input)
Frequency Response:	95 Hz to 17.6 kHz, -3 dB re 1 kHz (line inputs) 125 Hz to 17.0 KHz, -3 dB re 1 kHz (microphone input)
Operating Requirements:	32°-122°F (0-50°C)
Mounting Kit:	Wall or Ceiling mount: BKT 024 Omnidirectional mount
Compatible Receivers:	WIR RX22-4, IR RX20
Warranty:	2-year warranty against component failure and manufacturing defects. See Full Warranty statement on the website for details.
Approvals/Regulatory Compliance:	CE, FCC, Industry Canada, WEEE, RoHS, CB Scheme, RCM, PSE

 

2 Years