Pocketalker Products

WaveCAST System with 2 WAV Pro Wi-Fi Receivers

WaveCAST Systems

WF SYS1C

Experience real-time audio streaming over Wi-Fi with the WaveCAST Wi-Fi assistive listening system. It includes 2 user-friendly WAV Pro Wi-Fi Receivers, featuring the industry’s largest 6.8” full HD+ display, Bluetooth® compatibility*, and up to 40 hours of continuous streaming under typical use. This system meets ADA hearing accessibility requirements for venues with seating capacities of up to 50.

The WAV Pro Wi-Fi Receiver seamlessly connects to any Williams AV WaveCAST-enabled product through the venue’s existing Wi-Fi network. It is the only newly designed Wi-Fi device dedicated exclusively to assistive listening. Guests can also easily access WaveCAST audio via their personal smartphone using the WaveCAST app.

Note: An existing Wi-Fi network is required.

*Connecting via Bluetooth to headphones or earbuds may result in minimal latency

Systems

IMPORTANT BATTERY CHARGING AND SAFETY INSTRUCTIONS FOR WAV PRO RECEIVERS (WF-R2)
Do not attempt to open, disassemble, or service the battery pack. Do not crush, puncture, short contacts or dispose of in fire or water. Do not incinerate or expose to temperatures above 140ºF (60ºC). Do not charge in temperatures above 114ºF (40ºC) or below 41ºF (5ºC). If the receiver or battery swells, discontinue use immediately. Replace only with battery pack designated for this product. Recycle or dispose of properly.

Important Charging Instructions
Charge the receivers using only the Williams AV approved CHG 406 or CHG 001 charger and follow the below instructions. Failure to do so may void the warranty.

  • Disconnect the receivers from the charger once they are fully charged.
  • Do not leave the receiver unused for extended periods. If the receiver is not in regular use, store at around 50% charge level

System Includes

(1) WaveCAST C Wi-Fi Transmitter (WF T5C)
(2) WAV Pro Wi-Fi Receivers (WF R2-03)
(2) Neckloops (NKL 008)
(1) Rack Panel Kit (RPK 005)
(2) Folding Stereo Headphones (HED 024)
(1) ADA Wall Plaque (IDP 008)

(2) USB Charging Cable and Power Supply (AC CHG 001)

Features

IMPORTANT BATTERY CHARGING AND SAFETY INSTRUCTIONS FOR WAV PRO WF-R2 RECEIVERS
Do not attempt to open, disassemble, or service the battery pack. Do not crush, puncture, short contacts or dispose of in fire or water. Do not incinerate or expose to temperatures above 140ºF (60ºC). Do not charge in temperatures above 114ºF (40ºC) or below 41ºF (5ºC). If the receiver or battery swells, discontinue use immediately. Replace only with battery pack designated for this product. Recycle or dispose of properly.

Important Charging Instructions
Charge the receivers using only the Williams AV approved CHG 406 or CHG 001 charger and follow the below instructions. Failure to do so may void the warranty.

  • Disconnect the receivers from the charger once they are fully charged.
  • Do not leave the receiver unused for extended periods. If the receiver is not in regular use, store at around 50% charge level

HED 024

Style Stereo Headphones
Plug 3.5mm stereo
Cord 39"
Driver Size 30 mm
Nominal Impedance 16Ω
Freq. Response 20 - 20kHz
Weight 60g
Max Power Input 100 mW
Sensitivity 108 dB @ 1kHz
Replacement Pads HED 023 (one pair)
 

IDP 008

10-3/8" (L) x 6-¼" (W) x 1/8" (H)  

WF R2

Dimensions 3.02" W x 0.35" D x 6.64" H (76.7 mm x 9 mm x 168.7 mm)
Weight 7.41 oz (210g) without case
Display 6.8” Full HD+ Infinity Dot 1080 x 2460 Resolution | 396ppi
Receiver Jack 3.5mm (1/8”) stereo headphone jack
Battery Life Lithium Polymer (Li-Po) 5000 mAh, non-removable
Battery Life Up to 40 hours of continuous audio streaming
USB Connection USB Type C for power and charging
Wi-Fi Frequency Compatibility Works on both 2.4Ghz and 5Ghz
Approvals CE, FCC, WEEE, CB Scheme, UK CA, RoHS3, IC. RCM  Pending
Warranty Williams AV warrants the WAV Pro Wi-Fi Receiver against defects in materials and workmanship under normal use and conditions for two years from the purchase. The WAV Pro Receiver’s rechargeable battery is warrantied for one year from the date of purchase.

NKL 001-S

Color: Black
Weight: 1.5 oz
Length: 18.5” cord
Connector: NKL 001: 3.5 mm mono plug NKL 001-S: 3.5 mm stereo plug with ring disconnected
Impedance: 8-16 Ohms
Input Power: 500 mW max
Magnetic Field Strength: 25 mW input at 1000 Hz produces 1.7 A/m 6” above the center of loop 85μW input produces 0.1 A/m (IEC Standard)
Approvals: RoHS, WEEE
Warranty: One Year

WF T5C architectural and engineering specifications

a

WF T5C

Dimensions 8.45" W x 8.25" D x 1.72"H (21.5 cm x 21 cm x 4.4 cm)
Weight Transmitter: 3.2 lbs (1.45 kg)
Color Black
Rack Mount Standard 19” Rack, one EIA rack space high, 1/2 space wide 1–2 units can be mounted in a single rack space with optional RPK 005 (single) or RPK 006 (double) Rack Mount Kits
Power Supply Desktop Style Transformer (TFP 062); Input: 100-240 VAC, 50/60 Hz. IEC Line Cord; Output: 24 VDC, 750 mA, 18W. 2.5mm ID center positive barrel connector
Power ON Indicator Push On/Push Off latching power button with backlight. Green backlight indicates power ON, backlight off indicates power OFF.
Temperature Range Operating: +32° F to +122° F (0° C to 50° C); Storage: -4° F to +158° F (-20° C to 70° C)
User Interface 1. 3.12” High Resolution OLED display with selections via buttons. 2. Hosted Web page. 3. Telnet commands over ethernet (see our WaveCAST and FM+ Programmers Guide" for available commands and protocol).
Dante (1x) RJ-45 jack. Only available on WF T5CD
Ethernet RJ-45 on back of unit supports CAT 5e cable lengths up to 328 feet (100 meters); 10/100 Base-T IEEE 802.3 compliant, unique MAC address. RJ-45 jack used for web page and streaming audio out. An external Router/DHCP Server is required to stream audio to receiving devices.
Audio Section
Audio Inputs (1x) Combination 3-pin XLR, 1/4” (TRS) jack for balanced or unbalanced line level, or balanced or unbalanced microphone with selectable phantom power. Optional RJ-45 Dante Input (“D” models only).
Audio Processor Functions DSP based; Compression: 1:1, 1.5:1 or 2:1; High-pass and Low-pass Filter Frequency control, Music, Voice, and Hearing Assistance Audio Presets
Frequency Response 31-16000 Hz, ±3 dB (re: 1 kHz) (“Music” Audio Preset)
Signal-to-Noise Ratio 64 dB (typical) Transmitted RF @ 1kHz
Total Harmonic Distortion Less than 0.25% @ 1 kHz (RF output)
Common Mode Rejection Greater than 57 dB @ 1 kHz, Mic or Line mode
Audio Input Gain Adjust Adjustable from +24dB to -60 dB, in 1dB steps from front screen or web page
Phantom Power 14.4 VDC applied through 2.2 kOhms resistors to analog combo jack: Pin 2 and Pin 3 on XLR jack, or tip and ring on 1/4" TRS jack
Audio Level Display Front screen bar graph display, each segment representing 3dB. It ranges from -18 (1 segment lit) to +12dB (10 segments lit). Over-range warning is indicated by 'OLVD' and flashing empty bar.
Headphone Output 1/4" TRS stereo jack, mono signal, 7.8 mW total power with 33 Ω.
Dante Output (1x) RJ-45 jack, only available on WF T5CD
Input Level (Bal or Unbal) (at Audio Input Gain = 0dB)
Nominal (@7th Segment Lit) Overload Warning (Displayed on Screen) Absolute Max. Rating*
Microphone
-45 dBV (5.6 mV RMS) -20 dBV (100 mV RMS) +20 dBV (10.0 V RMS)
Line
-8.4 dBV (380 mV RMS) +16 dBV (6.5 V RMS) +20 dBV (10.0 V RMS)
Approvals FCC, RoHS3, WEEE, Industry Canada, CE, UK CA, RCM
Warranty 2-year parts and labor
Note: Please be aware firmware is model-specific ** Stresses above these ratings may cause permanent damage. Exposure for extended periods may degrade reliability. This device complies with Industry Canada licence-exempt RSS standard(s) and FCC part 15.105[b] for the United States.  Operation is subject to the following two conditions: [1] this device may not cause interference, and [2] this device must accept any interference, including interference that may cause undesired operation of the device.

AC CHG406

Dimensions: 7.2”L x 5.1”W x 1.1”H (18.2 cm x 12.9 cm x 2.7 cm)
Weight: 1.3 lbs (0.58 kg)
Color: Black and clear plastic
Power Input: AC100-240V 50/60Hz 0.5A max
Power Output: DC 5.0V/10A (50W)
Ai Output DC 5V/2.4A
Indicators: Individual Charging Indicators: Blue LEDs light up dividing clear panels
Cable Length 1.5m (4.9ft)
Compatible Units: WAV Pro Wi-Fi Receiver (WF R2-03) and (WF R2-N)
Warranty: 1 year (90-day warranty on cables and power supply)
Approvals: CE, FCC, ETL and RoHs
Notes:
Accepts USB type A plugs, with a USB-C or with a micro-B plug that can connect to the device to be charged.

Warranty

2 Years

FM T5C & WaveCAST C | WebUI Walkthrough

Unboxing the WAV Pro Wi-Fi Receiver

No Firmware Found

Design & Consultant Specs