The DL102 Loop amplifier provides a practical solution for a user to hear with their T-coil enabled hearing device in small areas such as counters and service desks.
Audio is wired into the DL102 amplifier via a line-level input or microphone. Audio is fed from the amplifier through the loop wire in the area where a T-coiled hearing device can pick-up the audio.
With no direct connection between the user and service personnel, users can hear effectively when using the T-coil in their customized hearing devices.
This loop system is supplied with a loop pad and a spool of wire.
DL102 amplifier
Power supply
AC line cord
Loop notice stickers
Set of adhesive cable clips
Surface Microphone
PLW 037 (120ft Spool of wire)
PLM 001 – Loop Pad
The DL 102 and a loop pad are installed discretely on the side or under the counter.
|
Audio Input: |
3 (1 microphone or line input, isolated line input, Mic) |
|
Connector Type: |
3.5mm jack, Mic-2 pole line in, 3 pole line in, Mic in |
|
Power Supply: |
12V DC 1.5 A output |
|
Power Voltage: |
100-240VAC, 50/60Hz – 2.0A Input |
|
Dynamic Range: |
[gt] 60 dB |
|
THD: |
THD+N [lt] 0.5% – 1kHz |
|
Amplifier Type: |
Constant current |
|
Loop Resistance: |
0.1 Ω to 1.0 Ω |
|
Current Output: |
2A RMS at 1kHz (2.8 APK) |
|
Protection: |
Thermal, short-circuit and start |
|
Dimensions: |
3.9” x 2.3” x 1” (100mm x 60mm x 25mm) |
|
Amplifier Weight: |
0.48 lbs (218 g) |
| Lead Wire Length | 16 ft / 5 m |
| DC Resistance | 1.3 Ohms |
| Weight | 0.5 lbs / 225 g |
| Pad | 14 in / 0.4 m square |
| Wire In Pad | 10-turn loop |
|
Length |
120ft |
|
Spool Dimensions: |
6.5"Dia |
|
Spool Weight: |
9.8 lbs |
|
Color/Material: |
White |
2 Years
©Copyright 2023 – Williams AV, LLC
Williams AV, Williams AV Hear. See. Engage., Williams Sound, Williams Sound, “W” graphic, Pocketalker, SoundPlus, and Personal PA are registered trademarks of Williams AV, LLC.
10300 Valley View Road
Eden Prairie, MN 55344
USA
Receive our latest updates to your inbox! Enter your email address:
