11-Person Digi-Wave Tour Guide System (Rechargeable)

DWS TGS 11 400 RCH

This portable, wireless tour system enables a tour guide to communicate via the transceiver to as many as 11 guests using rechargeable receivers.

5 Year Warranty Badge
Visit the Warranty and Registration page for details

 

The frequency-hopping algorithm of the Digi-Wave system ensures secure, seamless communication without any interference. This tour guide system comes with a durable carrying case for convenient transport, 12-bay charger, a headset for the guide, and earphones for guests.

System Includes

(1) DLT 400 transceiver
(11) DLR 400 RCH receivers
(1) MIC 144 headset microphone
(11) EAR 022 surround earphones
(1) CHG 412 PRO 12-bay charger in carry case
(1) CCS 061 GR grey silicone skin

How It Works

11-person Digi-Wave Tour Guide System

CCS 054

Dimensions: 26.2" L x 19.7" W x 13.2" H
Weight: 23 lbs.
Note: The CCS 054 replaces the CCS 049.
 

CHG 412

Dimensions: 9"L x 7"W x 1.5"H (23 cm L x 17.8 cm W x 3.8 cm H)
Weight: 1.8 lbs (845 g)
Enclosure: Black, ABS plastic with metal base
Power Supply Input: TFP 066, 90-240 VAC input, 1.5 A max *
Power Supply: Universal DC adapter, 5 VDC - 6A output, center positive
Output Rating: 5 VDC, 0.5 A per bay (12 charging bays)
Charging Time: ~5 hours
Unit Capacity: 12 Units
Compatible Units: Transceiver: DLT 400 Receiver: DLR 400 RCH
Indicators: Charge status indicators on DLT or DLR
Approvals: CE, FCC, WEEE, RoHS, CB
Warranty: 2-year (cables and power supply warranty for 90 days)
* Eight separate CHG 412s (each powered by their own TFP 066 power supply) can be connected to a 15-amp circuit.

DLR 400 RCH

Dimensions 4.22"W x 2.60"H x 0.50"D (107.3 mm x 66 mm x 12.6 mm)
Weight 3.3 oz (94 g) including battery
Color Black
Battery type Lithium Polymer with smart charge built into transceiver; 1800 mAH
Battery life Up to 32 hrs per charge @ 1ch Rx
Power Save Auto Sleep Mode after 5 minutes of no RF signal from compatible devices
Charge time 5 hrs. approx.
System Voltage OLED 14VDC; RF 5VDC; Logic 3.3 VDC
Operating frequencies 2.4 GHz (ISM band); 2402 – 2476 MHz FHSS
Audio Frequency response (-3dB Level) Intercom Mode: 100 - 7,200 Hz Other Modes: 100 - 11,500 Hz
SNR 73 dB (A-weighted)
THD 0.1 % (Default Volume, 1kHz)
Headphone Output 3.5 mm TRRS headphone jack; 25 mW, R32 Ω
Line Audio Output USB-C, Adjustable Level
Range Up to 900 ft (274 m) (depending upon environmental conditions)
Modulation FSK
RF Sensitivity -92 dBm
Security 87-bit encryption (300 Series Compatible), 87+128 bit Encryption, Encryption PIN, Lock for settings
Indicators OLED
LEDs Bi-color, changing green and red LED at top
Charging Connectors USB-C; Two contacts for use with CHG 412
Compatible Units DLT 400, DLT 300 with some limitations
Operating Tempurature Range 14º to 113ºF (-10º to 45ºC)
Approvals FCC, Industry Canada, CE, RoHS 3, WEEE, RCM, ANATEL, KC, Giteki
Warranty 5 years on parts and labor with product registration; 2 years standard without registration. Internal batteries are covered for 1 year and accessories for 90 days, regardless of registration.     
Visit the Warranty and Registration page for details.   
 

DLT 400

Dimensions 4.22"W x 2.60"H x 0.50"D (107.3 mm x 66 mm x 12.6 mm)
Weight 3.3 oz (94 g) including battery
Color Black/Silver (Front/Back)
Case Material Black ABS plastic
Battery type Lithium Polymer with smart charge built into transceiver; 1800 mAH
Battery life Up to 16 hrs talk time per charge@ 1ch Tx and 1ch Rx
Power Save Auto Sleep Mode after 5 minutes if no RF signal from compatible devices (Power can be turned off in Advanced Settings if desired)
Charge time 5 hrs. approx.
System Voltages OLED 14VDC; RF 5VDC; Logic 3.3 VDC
Operating frequencies 2.4 GHz (ISM band); 2402 – 2476 MHz FHSS
Audio Frequency response (-3dB Level)
Interpretation, Tour, Hearing Asst (≤4 mics): 100 – 11,500 Hz
Other Modes: 100 – 7,200 Hz
SNR 73 dB (A-weighted, default Rx volume with mic input )
THD 0.1 % (Default Volume, 1kHz)
Microphone input Internal microphone (disabled when MIC jack engaged) and 3.5 mm phone jack (sleeve) with electret microphone bias, adjustable gain with 63dB range.
Line Input USB-C, Adjustable level
Headphone Output 3.5 mm TRRS headphone jack; 25 mW, R 32 ohms
Audio Output Headphone: Max SSPL 90 111.8dB (EAR 013), 116.8dB (EAR 041) Line: USB-C, Adjustable level
Range Up to 900 ft (274 m) (depending upon environmental conditions)
Modulation FSK
RF Output 19 dBm Max
Security 87-bit encryption (300 Series Compatible), 87+128 bit Encryption, Encryption PIN, Lock for settings
Side tone -6 dB below volume, tone variation (Off, Low and High settings available)
Indicators OLED
LEDs Red LED around Talk button when enabled; Bi-color, changing green and red LED at top
Charging Connectors USB-C; Two contacts for use with CHG 412
Compatible Receiver DLR 400 RCH, DLR 400 ALK, DLT 300 with some limitations and DLR 360 with some limitations
Operating Temperature Range 14º to 113ºF (-10º to 45ºC)
Approvals FCC, Industry Canada, CE, RoHS 3, WEEE, RCM, ANATEL, KC, Giteki
Warranty 5 years on parts and labor with product registration; 2 years standard without registration. Internal batteries are covered for 1 year and accessories for 90 days, regardless of registration. Visit the Warranty and Registration page for details. 
 

EAR 022

Style Around-ear speaker
Plug 3.5mm mono
Cord 39"
Driver Size 23 mm
Nominal Impedance 32Ω
Freq. Response 20 - 20kHz
Weight 15g
Max Power Input 30 mW
Sensitivity 118 dB @ 1kHz
 

Warranty

5 years with registration - 2 years standard (90 days for accessories)

What is the DWS TGS 11 400 RCH?
It’s a portable, fully rechargeable wireless tour guide system for one guide and up to 11 guests. The guide speaks into a headset mic connected to a DLT 400 transceiver. Guests hear the guide clearly through DLR 400 RCH receivers and earphones, even in noisy or spread-out spaces. It works well for museum, factory, campus, winery and outdoor tours.

What’s included in the kit?

  • 1 DLT 400 transceiver
  • 11 DLR 400 RCH rechargeable receivers
  • 1 MIC 144 headset microphone
  • 11 EAR 022 surround earphones
  • 1 CHG 412 PRO 12-bay charger in carry case
  • 1 CCS 061 GR silicone skin (grey)

What does “RCH” mean?
RCH means the receivers are rechargeable. Each DLR 400 RCH has a built-in 1800 mAh lithium-polymer battery, so you never have to buy or replace AAA batteries between tours. If you’d rather use disposable batteries, the DLR 400 ALK runs on AAA alkalines.

How long do the batteries last?
Guest receivers run up to 32 hours per charge. The guide’s DLT 400 runs up to 16 hours of talk time per charge. Both take about 5 hours to fully charge, so an overnight charge has the whole system ready for the next day.

How do I charge the system?
The CHG 412 has 12 bays, enough to charge the guide’s transceiver and all 11 guest receivers at the same time. Each docked unit shows its own charge status. You can also charge any single unit with a USB-C cable.

What is the range?
Up to 900 ft (274 m), so guests can wander a bit and still hear the guide. Walls, crowds and other 2.4 GHz devices can shorten it.

Can I run more than one tour at the same time?
Yes. Each guide’s transceiver and that group’s receivers are set to their own group, so tours in the same building don’t hear each other. To run more tours, add another kit or more DLT 400s and receivers.

Can guests ask the guide questions through the system?
Not with the included receivers, because DLR 400 RCH units are receive-only. If you want two-way conversation, for example with a second guide or a staff member, add more DLT 400 transceivers. A Digi-Wave 400 system supports up to six simultaneous talkers.

Can I add more guests?
Yes. Digi-Wave 400 supports an unlimited number of listeners. You can add DLR 400 RCH or DLR 400 ALK receivers, and each extra CHG 412 charges 12 more units. Up to eight CHG 412 chargers can share a single 15-amp circuit.

Is the audio secure?
Yes. The system uses digital frequency-hopping spread spectrum in the 2.4 GHz band, with 87-bit and 128-bit encryption, an encryption PIN and a settings lock, so people outside the tour can’t listen in with other equipment.

Does it need a license or frequency coordination?
No. It runs in the license-free 2.4 GHz ISM band. It is approved for FCC, Industry Canada, CE, RCM, ANATEL, KC and Giteki markets.

Can guests use their own earphones or a neckloop?
Yes. The receivers use a standard 3.5 mm jack. Williams AV options include earbuds, folding headphones, hearing-protector headsets for loud environments like plant floors, and the NKL 001 neckloop for guests with T-coil hearing aids or cochlear implants.

Can the guide use a different microphone?
Yes. The DLT 400 has a built-in mic and a 3.5 mm mic jack with adjustable gain. Compatible options include the MIC 044 headset, the MIC 054 lapel mic, the MIC 014-R plug-mount mic and the MIC 068 heavy-duty dual-muff headset for high-noise areas.

Can I play recorded audio or music through the system?
Yes. The DLT 400 has an adjustable line input over USB-C, so you can feed in audio from a phone, laptop or mixer.

Is it compatible with my existing Digi-Wave equipment?
The DLR 400 RCH works with the DLT 400, and it works with the DLT 300 with some limitations. The DLT 400 also works with DLR 400 ALK receivers, and with DLR 360 units with some limitations.

Is there firmware or a user manual?
Yes. The product page offers DLR 400 RCH firmware v1.4.1, the Digi-Wave 400 Series user manual in English and Spanish, the CHG 412 charger manual, a security features guide and a Digi-Wave comparison chart.

What happens if I forget to turn a unit off?
Units go to sleep on their own after 5 minutes without a signal, which saves battery.

What’s the warranty?
The DLT 400 and DLR 400 RCH are covered for 5 years on parts and labor if you register the product (2 years if you don’t). Internal batteries are covered for 1 year and accessories for 90 days. The CHG 412 charger has a 2-year warranty (90 days on cables and power supply). Full terms are at williamsav.com/support/warranty-product-registration.

How do I get pricing?
Click “Request More Info” on the product page and the Williams AV team will follow up with a quote.

Design & Consultant Specs