The IR+ Control Center provides audio over Wi-Fi and Infrared. Infrared is best used for assistive audio in large spaces, or for secured audio transmission within a room. Connect the IR M1 to a Wi-Fi multicast router or in-house network to stream audio over Wi-Fi to the Williams AV WaveCAST app (available in the iOS app store or Google Play store).
The IR+ Control Center features a distributed infrared emitter array architecture allowing up to four emitters either stacked together for large room arrays or distributed throughout the room to accommodate wings in room design, balconies or other obscured venue locations.
The rack mounted or remotely located IR M1 Control Center comes standard with support for up to four IR emitters. Each emitter runs back to the modulator via a CAT5e cable, providing the audio and power needed to support the remote emitter. Each emitter has a coverage area of 18,000 sq. ft.
AES67 & Native Dante® Integration: This version of the product features Dante. The IR M1 D is Dante AES67 compliant, so it connects natively with Dante devices and interoperates with other AES67-compatible professional audio equipment, giving integrators more flexibility to build mixed-brand systems without extra hardware.
Enterprise-Ready with Dante Domain Manager: The IR M1 D works with all three Dante Domain Manager (DDM) tiers, Silver, Gold, and Platinum, giving IT and AV teams secure, login-based permissions, room-by-room device grouping, and the ability to manage and scale the system across an entire building or campus from one place.
*Note: Firmware updates are currently unable to be completed on Mac computers.
| Dimensions: | 19” (W) x 1.75” (H) x 8.2” (D) (48.3 cm x 4.5 cm x 20.8 cm) |
| Weight: | 5.2lb. (2.4 kg) |
| Color: | Black |
| Rack Mount: | Single Rack Unit |
| Power Supply: | International Desktop Supply Input: 36 W, 110-240 VAC 50-60 Hz Output: +48VDC, 0.75A center-positive |
| Power Switch: | Rocker switch with LED |
| Signal to Noise Ratio: | 67 dB (typical) |
| Modulation: | FM Wideband, +50kHz deviation, 50uS pre-emphasis |
| Carrier Frequency: | Selectable, 2.3/2.8 or 3.3/3.8MHz |
| Frequency Response: | 40 to 16,000Hz, +1 dB, -3dB, electrical response |
| Total Harmonic Distortion: | Less than 2%, electrical response |
| Audio Processor Functions: | DSP based; Compression 1:1, 1.5:1, or 2:1; High-pass and low-pass filter frequency control |
| Auto Carrier Shut-Off: | Adjustable timer shuts off carrier when no audio is present. Adjustable through webpage. |
| Infrared Test LED: | Dual IR LED for receiver testing, monitoring, and audio signal testing. |
| Audio Input: | (2x) Combination 3-pin XLR, 1/4” (TRS) jack for balanced or unbalanced line level, or balanced or unbalanced microphone with selectable phantom power |
| Dante: | Included |
| Networking: | AES67 Compliant: Yes. Dante Domain Manager (DDM) Compatible: Yes (Silver / Gold / Platinum). |
| Internal Test Tone: | 400 Hz internal test tone selectable as audio input source for setup and diagnostics |
| Remote Configuration: | Available through embedded website |
| Headphone Output: | (2) 1/4″ headphone jacks on front panel for monitoring CH A and CH B audio inputs |
| Emitter Output Jack: | Four RJ-45 ports for CAT5e cables; provides +48VDC Power, RS-485 communication, and Baseband signals for IR transmission. |
| Operating requirements: | 0-50ºC ambient temperature, non-condensing, non-corrosive atmosphere |
| Approvals: | CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI, AES67 |
| Warranty: | 2 years on Modulator, 90 days on accessories |
2 Years
The IR+ Control Center provides audio over Wi-Fi and Infrared. Infrared is best used for assistive audio in large spaces, or for secured audio transmission within a room. Connect the IR M1 to a Wi-Fi multicast router or in-house network to stream audio over Wi-Fi to the Williams AV WaveCAST app (available in the iOS app store or Google Play store).
The IR+ Control Center features a distributed infrared emitter array architecture allowing up to four emitters either stacked together for large room arrays or distributed throughout the room to accommodate wings in room design, balconies or other obscured venue locations.
The rack mounted or remotely located IR M1 Control Center comes standard with support for up to four IR emitters. Each emitter runs back to the modulator via a CAT5e cable, providing the audio and power needed to support the remote emitter. Each emitter has a coverage area of 18,000 sq. ft.
AES67 & Native Dante® Integration: This version of the product features Dante. The IR M1 D is Dante AES67 compliant, so it connects natively with Dante devices and interoperates with other AES67-compatible professional audio equipment, giving integrators more flexibility to build mixed-brand systems without extra hardware.
Enterprise-Ready with Dante Domain Manager: The IR M1 D works with all three Dante Domain Manager (DDM) tiers, Silver, Gold, and Platinum, giving IT and AV teams secure, login-based permissions, room-by-room device grouping, and the ability to manage and scale the system across an entire building or campus from one place.
*Note: Firmware updates are currently unable to be completed on Mac computers.
