| Dimensions: |
19” (W) x 1.75” (H) x 8.2” (D)
(48.3 cm x 4.5 cm x 20.8 cm) |
| Weight: |
5.2lb. (2.4 kg) |
| Color: |
Black |
| Rack Mount: |
Single Rack Unit |
| Power Supply: |
International Desktop Supply
Input: 36 W, 110-240 VAC 50-60 Hz
Output: +48VDC, 0.75A center-positive |
| Power Switch: |
Rocker switch with LED |
| Signal to Noise Ratio: |
67 dB (typical) |
| Modulation: |
FM Wideband, +50kHz deviation, 50uS pre-emphasis |
| Carrier Frequency: |
Selectable, 2.3/2.8 or 3.3/3.8MHz |
| Frequency Response: |
40 to 16,000Hz, +1 dB, -3dB, electrical response |
| Total Harmonic Distortion: |
Less than 2%, electrical response |
| Audio Processor Functions: |
DSP based; Compression 1:1, 1.5:1, or 2:1; High-pass and low-pass filter frequency control |
| Auto Carrier Shut-Off: |
Adjustable timer shuts off carrier when no audio is present. Adjustable through webpage. |
| Infrared Test LED: |
Dual IR LED for receiver testing, monitoring, and audio signal testing. |
| Audio Input: |
(2x) Combination 3-pin XLR, 1/4” (TRS) jack for balanced or unbalanced line level, or balanced or unbalanced microphone with selectable phantom power |
| Dante: |
Optional |
| Internal Test Tone: |
400 Hz internal test tone selectable as audio input source for setup and diagnostics |
| Remote Configuration: |
Available through embedded website |
| Headphone Output: |
(2) 1/4″ headphone jacks on front panel for monitoring CH A and CH B audio inputs |
| Emitter Output Jack: |
Four RJ-45 ports for CAT5e cables; provides +48VDC Power, RS-485 communication, and Baseband signals for IR transmission. |
| Operating requirements: |
0-50ºC ambient temperature, non-condensing, non-corrosive atmosphere |
| Approvals: |
CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI |
| Warranty: |
2 years on Modulator, 90 days on accessories |
