IR+ Secure

IR SY12

IR+ system packed with all the tools needed for a secure, functioning system.

Dante

Description

IR+ system packed with all the tools needed for a secure, functioning system.

System Includes

IR M1  infrared modulator
(2) IR E4 emitters
(5) IR RX20 receivers
CHG 520 charger
(2) NKL 001 Neckloops
MLB 003 Linking bar
(2) BKT 024 brackets
IDP 008 Accessibility Signage

IR SY12

IR M1

Dimensions: 19” (W) x 1.75” (H) x 8.2” (D)
(48.3 cm x 4.5 cm x 20.8 cm)
Weight: 5.2lb. (2.4 kg)
Color: Black
Rack Mount: Single Rack Unit
Power Supply: International Desktop Supply
Input: 36 W, 110-240 VAC 50-60 Hz
Output: +48VDC, 0.75A center-positive
Power Switch: Rocker switch with LED
Signal to Noise Ratio: 67 dB (typical)
Modulation: FM Wideband, +50kHz deviation, 50uS pre-emphasis
Carrier Frequency: Selectable, 2.3/2.8 or 3.3/3.8MHz
Frequency Response: 40 to 16,000Hz, +1 dB, -3dB, electrical response
Total Harmonic Distortion: Less than 2%, electrical response
Audio Processor Functions: DSP based; Compression 1:1, 1.5:1, or 2:1; High-pass and low-pass filter frequency control
Auto Carrier Shut-Off: Adjustable timer shuts off carrier when no audio is present. Adjustable through webpage.
Infrared Test LED: Dual IR LED for receiver testing, monitoring, and audio signal testing.
Audio Input: (2x) Combination 3-pin XLR, 1/4” (TRS) jack for balanced or unbalanced line level, or balanced or unbalanced microphone with selectable phantom power
Dante: Optional
Internal Test Tone: 400 Hz internal test tone selectable as audio input source for setup and diagnostics
Remote Configuration: Available through embedded website
Headphone Output: (2) 1/4″ headphone jacks on front panel for monitoring CH A and CH B audio inputs
Emitter Output Jack: Four RJ-45 ports for CAT5e cables; provides +48VDC Power, RS-485 communication, and Baseband signals for IR transmission.
Operating requirements: 0-50ºC ambient temperature, non-condensing, non-corrosive atmosphere
Approvals: CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI
Warranty: 2 years on Modulator, 90 days on accessories

IR E4

Dimensions: 7.5” (W) x 1.4” (H) x 3.6” (D)
(19.1 cm x 3.6 cm x 9.1 cm)
Weight: 0.8 lb (362 g)
Color: Black
Power: 48 VDC supplied by IR M1 via CAT 5e cable.
Coverage Area: Up to 18,000 square feet in single channel mode
Connectivity: +48VDC Power, RS-485 communication, and Baseband signals for IR trasmission are all provided via a single CAT5e cable inserted into an RJ-45 jack from the IR M1.
Operating requirements: 0-50ºC ambient temperature, non-condensing, non-corrosive atmosphere
Approvals: CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI
Warranty: 2 years on Emitter; 90 days on accessories

CHG 520

Dimensions: 12″L x 6.25″W x 1.5″H (30.48 cm x 15.875 cm x 3.81 cm)
Weight: 13.6 lbs
Color: Black metal and plastic
Power Supply Input: 120 VAC
Power Supply: 100-240V / 12VDC TFP 043
Unit Capacity: 5 Units
Indicators: Individual Charging Indicators: Red LEDs
Warranty: 1 year (90 day warranty on cables and power supply)
Approvals: WEEE, RoHS, CE, FCC, CANADA, RCM, VCCI

IR RX20

Weight: 1.6 oz
Material and Color: IR Transparent polycarbonate, black
Battery Type: LiPo
Battery Life: 8 hours
Battery Charger: CHG 520
Operating Temp: 32-122° F (0-50° C)
Range: Up to 15,000 sq. ft. in single channel mode with IR T2 transmitter
Operating Frequency: 2.3 MHz or 2.8 MHz or stereo
Frequency Response: 100 Hz to 12 kHz, ± 3 dB
Signal to Noise Ratio: 60 dB at 10 m
Controls: Volume control thumbwheel;3-position selection switch (2.3 MHz, 2.8 MHz, stereo), Off/on slider for power
Acoustic Output: 120 dB MAX SSPL90 with 2 cc coupler
Compatibility: Compatible with 2.3 MHz and 2.8 MHz IR transmitters
Headphone Jack: 3.5mm stereo
Ear pads: EAR 089
Approvals: CE, RoHS, FCC, Canada, RCM, VCCI, WEEE
Warranty: 5 years (90 days on battery)

Warranty

2 Years

No Videos Are Available

Request a Demo

  • Hidden
  • This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.