Personal FM Value Pack System (with earbud)

PPA VP 37

The Personal FM Value Pack System Value Pack System PPA VP 37 broadcasts a speakerĀ“s voice, music program, or audio service wirelessly up to 1000 feet to a listening audience.

Participants using the single-channel receiver with an earbud or neckloop (included) can listen to the broadcast at the volume of their comfort. The cornerstone of the Personal FM Value Pack System is the T27 transmitter, featuring an LED display panel and push-button channel selection for easy operation.

This system has 17 available channels and operates on 72-76 MHz. This system complies with 2010 ADA guidelines for hearing assistance.

Note: This product is only available with 100V power supply and US plug type.

Earbuds/Neckloops

System Includes

(1) PPA T27 Transmitter
(4) SELECT PPA R37 Receivers
(4) BAT 001-2 AA batteries
(4) EAR 013 single mini earbuds
(2) NKL 001 neckloops
(1) IDP 008 Wall Plaque
(1) WCA 013 Audio Cable
(1) ANT 021 Antenna
(1) TFP 036 Power Supply

*All items can be purchased separately

NOTE: The Personal PA Value Pack System is approved by the FCC for operation in U.S. markets. The system cannot be used in all countries. Check with your governmentĀ“s radio regulations for 72-76 MHz operation.

Disclaimer: FCC rules limit use of this equipment to auditory assistance.

Features

  • PPA T27 transmitter
  • Up to 1000ā€™ operating range
  • Transmitter is FCC Part 15 compliant
  • Great for portable use
  • Flexible 3.5mm mic and RCA line-level inputs
  • Lifetime PLUS Limited Warranty. 90 days on accessories.
  • Transmitter is FCC Part 15 compliant

ANT 021

Note: The FCC requires this antenna to be professionally installed.

Used with PPA T45, PPA T55, PPA T55C, PPA T27 Transmitters
Connector type Screw to PCB
Cable type N/A
Nominal Impedance 75 Ohms
Length 9 inches
 

BAT 001-2

Alkaline, 1.5 Volt  

EAR 013

Plug 3.5 mm mono
Cord length 39 inches
Impedance 32 Ohms
Frequency Range 20 - 20kHz
Max input power 5mV
Sensitivity 128dB @ 1kHz
Driver size 13 mm
Weight 9g
Replacement earpad EAR 015
 

IDP 008

10-3/8" (L) x 6-Ā¼" (W) x 1/8" (H)  

NKL 001

Color: Black
Weight: 1.5 oz
Length: 18.5ā€ cord
Connector: NKL 001: 3.5 mm mono plug NKL 001-S: 3.5 mm stereo plug with ring disconnected
Impedance: 8-16 Ohms
Input Power: 500 mW max
Magnetic Field Strength: 25 mW input at 1000 Hz produces 1.7 A/m 6ā€ above the center of loop 85Ī¼W input produces 0.1 A/m (IEC Standard)
Approvals: RoHS, WEEE
Warranty: One Year

PPA R37 architectural and engineering specifications

  • The PPA R37 receiver shall be encased in black, PC/ABS impact-resistant plastic with a hinged battery door. The receiver shall be a body-pack style and include a detachable belt-clip for hands-free operation. The receiver shall have a 3.5mm stereo/mono jack to accommodate stereo or mono low impedance earphones, headphones and neckloops. The receiver shall have a combination volume control with power on/off rotator dial. It shall have a green LED indicating battery and system status codes. The R37 shall have access to 17 preset wideband channels between 72-76MHz. Channel selection shall be made by pushing the seek button inside the battery compartment. The receiver shall have channel-lock capability.
  • The receiver shall have a slide switch inside the battery compartment to select disposable Alkaline or NiMH rechargeable battery operation. It shall have charger contacts on the bottom of the receiver for use with Williams Sound drop-in chargers CHG 3512 and CHG 3502. The R37 shall operate up to 50 hours with two disposable AA Alkaline batteries and up to 32 hours with two AA NiMH rechargeable batteries (BAT 026).
  • The receiver shall provide a maximum out of 35mW at 16Ćø with an earbud type earphone. The systems audio frequency response shall be 200Hz to 15kHz Ā± 3dB and the signal to noise ratio shall be 65dB min. The receiver sensitivity shall be 2Ī¼V or better at 12dB Sinad with squelch defeated. The R37 shall accept up to Ā±75kHz FM deviation and have a 75 Ī¼ s de-emphasis time constant.
  • The R37 shall have FCC, Industry Canada approvals and be compliant with RoHS and WEEE regulations. The receiver shall be covered by a Lifetime PLUS Limited Warranty, excluding earphones, headphones and batteries.
  • This receiver model shall be the Williams Sound model PPA R37.

PPA R37

Dimensions: 4.1" x 2.85" x 1.38" (104 x 72 x 35mm)
Weight: 4.6oz (130g) with batteries. 2.6oz (73g) without batteries
Color: Black
Battery Type: (2) AA Alkaline or 2 x AA NiMH
Battery Life: Two (2) AA non-rechargeable alkaline batteries (BAT 001), approx. 50 hrs
(2) AA rechargeable NiMH batteries (BAT 026), 1500 mAh, approx. 32 hrs
Current Consumption: 52mA nominal
Temperature Range: ā€“ 0 to 50C
Channels 17, accessed via seek button in battery compartment
Operating Freq.: 72.1, 72.2, 72.3, 72.4, 72.5, 72.6, 72.7, 72.8, 72.9, 74.7, 75.3, 75.4, 75.5, 75.6, 75.7, 75.8, 75.9 MHz*
Intermediate Freq.: 75 kHz
FM Deviation: 75 kHz
De-Emphasis: 75 ĀµS
LED Indicator: Power: Green; Low Battery: Flashes Green
AFC Range: Ā± 120 kHz
Sensitivity: 2 ĀµV at 12 dB Sinad with squelch defeated
Input Overload: 100 mV
Frequency Response: 200 ā€“ 15 kHz
Modulation: FM, +/- 75 kHz peak deviation
Signal-to-Noise Ratio: 65 dB min @ 100 uV
Receive Antenna: Integral with earphone/headphone cord
Audio Output: 35 mW max, peak into 16 ohms
Output Connector: 3.5 mm stereo/mono phone jack
Earphone: Earbud-type with foam cushion, 3.5 mm plug, 32 Ī©
Auto Shut-off Enters sleep mode after approx 6 mins of no RF signal
Approvals: FCC, Industry Canada, RoHS, WEEE
Warranty: Lifetime PLUS Limited Warranty, 90 Days on most accessories.
 

PPA T27 architectural and engineering specifications

  • The transmitter shall be housed in a heavy duty black plastic case 4.1" x 6.1" x 1.3". It shall be microprocessor controlled with push button configuration. It shall have an operating range of up to1000ft. with optional ANT 005. It shall have seventeen wideband channels operating on the hearing assistance bandwidth between 72 MHz to 76 MHz. There shall be a ā€˜rubber duckieā€™ antenna output through the top of the enclosure.
Front Panel
  • The front panel shall have a push button controlled LED digital display showing the frequency selection. Once a frequency is selected, there shall be a lock or unlock feature by holding down both the up and down frequency buttons for three seconds. There shall be a 3.5mm mono microphone input jack for two wire electret microphones. It shall have a rotary input level control. There shall be up and down frequency select buttons.
Back Panel
  • The transmitter shall be powered by a 24VAC power supply via a 5 pin DIN connector. It shall have a 75 Ohm F-connector antenna output. It shall have a Line-level, high impedance RCA, mono/unbalanced input.
  • The transmitter shall have FCC, Industry Canada approvals, be compliant with RoHS and WEEE regulations, and be powered by a UL and CSA approved power supply. It shall be covered by a Lifetime PLUS Limited Warranty. It shall be compatible with Williams Sound FM equipment operating on 72 MHz to 76 MHz.
The transmitter shall comply with FCC Part 15. The transmitter shall be the Williams Sound model number PPA T27.

PPA T27

Dimensions [&] Weight: 4.1" W x 6.1" L x 1.3" H (104.1 mm x 154.9 mm x 33 mm)
7.8 oz. (221 g)
Color: Black
Power (U.S./Canada): 105-130 VAC, 50-60 Hz, 3.2 W at 120 VAC
Operating Frequencies: 72-76 MHz*: 72.1 (CH A), 72.2 (CH K), 72.3 (CH B), 72.4 (CH N), 72.5 (CH C), 72.6 (CH O), 72.7 (CH D), 72.8 (CH P), 72.9 (CH E), 74.7 (CH I), 75.3 (CH J), 75.4 (CH R), 75.5 (CH F), 75.6 (CH S), 75.7 (CH G), 75.8 (CH T), 75.9 (CH H)
Frequency Selector: External switches, 17 channels (lockable)
RF Field Strength: Does not exceed 80mV/m @ 3m
Nominal Range: Up to 1000 feet (305 m) w/standard ANT 021 ā€œrubber duckie" antenna or optional ANT 005 coaxial antenna.
Modulation: FM, 75 kHz deviation (wideā€“band) max.
Stability: Ā± .005% over 0-50ĖšC
Pre-Emphasis: 75 ĀµS
Frequency Response: 85Hz - 14kHz Ā±3dB
Distortion: 1% Max. THD
Signal to Noise Ratio: 65 dB with R35 Receiver
Microphone Input: 3.5mm mini phone jack, supplies +DC for electret mics
Mic Input Level: 1ā€“10 mV, nominal
Line-Level Input: RCA Jack, Hi Z, unbal.
Line Input Level: .1ā€“1 Vrms, nominal
Input Attenuator: Pot, screwdriver-adjustable
Antenna Outputs: Thread mount for ANT 021 ā€œrubber duckie" antenna or ANT 025 telescoping antenna RF connector for ANT 024 dipole or ANT 005 coaxial antenna
Approvals: FCC including part 15*, Industry Canada, RoHS, WEEE
Warranty: Lifetime PLUS Limited Warranty, 90 Days on most accessories.
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. *Effective July 11, 2016, the FCC has mandated tighter emissions limits on auditory assistance transmitters (72-76 MHz) manufactured or imported after this date to help avoid interference with and/or degradation of other airborne signals (All products manufactured prior to July 11, 2016, are compliant). Williams Sound FM transmitters ā€“ PPA T46, PPA T27 and PPA T45 (all models) ā€“ all have received a Grant of Certification from the FCC and are fully compliant/approved under this new mandate. Note: This product is only available with 110V power supply and US plug type.    

TFP 036

Input: 120 VAC, 60 Hz, 15 W Output: 12 VAC, 800 mA  

WCA 013

Description Single RCA - RCA audio cable
Used with PPA T27, PPA T45, PPA T45NET audio input cable
Connector type RCA - RCA
Cable type Two-conductor
Impedance N/A
Length 3 ft
 

Warranty

Lifetime PLUS Limited

No Videos Are Available

No Firmware Found

Request More Info

  • Hidden
  • This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Design & Consultant Specs