Wall Mounted Induction Loop Driver

Designed for simple discrete installation, the CLS1 offers the most cost effective and capable solution in its class. The amplifier is very compact and designed specifically for wall mounting. All connections and controls are secured behind a tamper resistant, hinged, detachable cover. Combined with its small size, the range of mounting and cabling options ensure that installation is convenient and tidy in any environment. Input options are comprehensive, with three independent inputs for balanced microphone, balanced and unbalanced line, low impedance and 100V – line speaker systems.


Williams AV is proud to offer Ampetronic Loop products in the United States and Canada. To purchase Ampetronic loop products in other countries, please visit https://www.ampetronic.com/

Input 1 Balanced Mic, balanced or unbalanced line
Input impedance 10kΩ per side
Min level (MIC / Line -73dBu / -31dBu
Max level (MIC / Line) -37dBu / +5dBu
Phantom voltage MIC only +12V
Input 2 Balanced or unbalanced line, expansion port
Input impedance 1MΩ per channel
Min level -33dBu
Max level +3dBu
Input 3 Isolated 100V line or low impedance mono or stereo speaker
Input impedance 100V Line / spkr 120kΩ / 7.8kΩ
Min level 100V Line / spkr +14dBu / -9dBu
Max level 100V Line / spkr [gt]+47dBu / [gt]+27dBu
AC power input supply 230V 30W 45-65Hz 120V option available (ETL Approved)
Connected via chassis mounted screw terminal block
Input fuse 230V version – T250mA / 120V version – T500mA
Drive voltage [gt]7.8Vrms – 11.0Vpk
Drive Current Continuous 1kHz sine wave [gt]3.5Arms 5.0Apk
Short term peaks [gt]5Arms 7Apk
Minimum Loop Resistance 0.2Ω
Maximum Loop Impedance 1.8Ω
Freq. response Frequency Response 80Hz to 6.3kHz ±3dB
Distortion THD+N [lt]0.5%1kHz sine at 1.66Arms
Automatic gain Control The AGC is optimised for speech. Dynamic range [gt]36dB
Metal loss correction (MLC) 0 to 3dB per octave frequency correction (1kHz remains constant). Control mounted on PCB.
Cooling Cooling Natural convection
Size W, H, D: 200mm, 200mm, 44mm
Weight 1.8 kg
Environment IP20, -10ºC to +40ºC
Mounting Wall mounting, secured by 4 screws

Warranty

5 Years

No Firmware Found

Request More Info

  • Hidden
  • This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Design & Consultant Specs